Learn how to make this Blue Coral Kumihimo Bracelet | beadsdirect.co.uk

Coral Kumihimo Bracelet

Products used in project:

Coral Kumihimo Bracelet

Items (5)
TOHO™ / Round 8/0 / Transparent / Smoky Topaz / 10g / ~ 300 pcs
Out of stock
5mm Jump rings / surgical steel / silver / wire 1mm / 25pcs
Out of stock
Lobster clasp / surgical steel / 10mm / silver / 4pcs
Out of stock
Total Cost

Not all products are available for this project

Information about project:

Coral Kumihimo Bracelet

Designed by: Holly Eve

Difficulty: Intermediate


Learn how to make this delightful Coral Kumihimo Bracelet using pretty Preciosa Czech glass pip beads. For this project you will need a kumihimo disk and you may want to use bobbins to make the braiding easier and tidier. Follow the step by step below or feel free to watch our Kumihimo video tutorial HERE which will show you the basic technique. We have suggested alternative products for this design due to the popularity of the original beads used.

Personalise your design by picking your favourite round seed and pip beads!

Materials needed:

TOHO ™ size 8/0 round seed beads
Preciosa Pip beads
End caps 3mm
Jump rings 4mm
Lobster clasp
S-Lon™ Thread
Jewellery Thread
Kumihimo round disk

Our tutorials are for inspiration and learning purposes. They include links to the relevant categories for you to choose your own colour combinations and we positively encourage you to experiment with different shapes, sizes, finishes, composition and texture. Why not choose your own beads and colours to achieve something in your own style? Let your imagination run wild and make your dream piece of jewellery.

Please note that the colours for the products illustrated in the image above may not match the 'Products List'. 

Step 1

Cut 4 lengths of cord measuring approx. 100cm each.

Step 2

Holding all 4 cords together, fold in the middle of the cords and knot together creating 8 ends. Place the knot through the hole in the centre of the braiding board. Spread the cords, placing them at the top, bottom, left and right on either side of the dots, in the notches of the braiding board (each cord in a notch is called a warp). 

Step 1

Step 3

Turn the braiding board over and thread on approx. 20 seed beads onto each of the 8 threads.
Next thread on 10 pip beads onto each thread.
Finally, thread on 20 more seed beads onto each of the 8 threads.
Wrap each cord into its own no-tangle bobbin
. You may want to add a weight to the knot to help your braid pull downwards and keep tension as you work.

Step 4

You should have a warp either side of dot 32. Rotate the board so you are holding this dot at the top. Take the warp from the notch to the left of dot 16 (at the bottom) and move it straight upwards to the notch to the left of the two warps at the top. You will now have 3 warps at the top and one at the bottom. Now take the warp furthest right at the top and bring it down to the right of the remaining bottom warp. Turn the braiding board 90 degrees counter-clockwise and repeat the same process, moving the bottom left warp to the top left, and the top right warp to the bottom right. Repeat this without adding any beads into your weave.
Repeat until you have approx 0.5cm of your braid that will be glued into your end cap.

Step 5

Start moving beads down your threads into the braid.
Each bead you move down will go under the first horizontal thread you come to and between the two threads before you continue to move the thread to the top notch.

Step 1

Step 2

Step 3

Step 6

Continue to move beads into your braid until you have used all the beads on your 8 strands. 

Step 7

Continue to braid after you have used your beads to create the 0.5cm braid that will be glued into the endcap. 

Step 8

Remove cords from the notches and knot together so the braid doesn’t unravel.
Now whip the ends to secure.
To whip, wrap the thread tightly around the braid just below the knot, and sew through the braid a couple of times to make sure it is securely fastened.
Repeat this on the other end so that the braid that will be glued into the end caps are thick enough to sit in the caps.
When you are happy that you have secured the braid; take some sharp scissors and cut off the knot close to the whip
. To complete, glue on end caps and add your clasp and attach jump rings together to create your extension chain. 

Step 9

We hope you enjoyed this tutorial. We would love to see your designs on our Facebook group, so feel free to drop by and share your inspiration. 

Step 1