Instructions on how to make the Cleopatra's Treasures Silver Necklace | beadsdirect.co.uk
0

Cleopatra's Treasures Silver Necklace

Products used in project:

Cleopatra's Treasures Silver Necklace

Items (5)
Qty
Price
Glue Beadalon G-S Hypo Cement 1/3oz
W139
1
Out of stock
Griffin Perlseide 2 Bead Cord Stan White 0.45mm with Needle 2m
TC299
1
Out of stock
X- Glass Bottle with Cork 10x22mm Sold Singly
CR167
1
Out of stock
Beadalon Silver Plated Crimp Beads 2mm #1 Pk100
FCR1
1
Out of stock
Beadalon Silver Plated Crimp Covers 4mm Pk144
F248
1
Out of stock
Total Cost
£0.00

Not all products are available for this project

Information about project:

Cleopatra's Treasures Silver Necklace

Difficulty: Intermediate

Rating:

Click the button below for instructions on how to make this long silver 'Cleopatra's Treasures' necklace.

Step 1

Take the silk thread off the card and knot the end. Use the attached needle to thread on a crimp bead. Now thread your beads in the following pattern, 1 x accent colour, 3 x main colour and repeat until you have added 25 accent colour beads.

After the last accent colour bead, thread on the upper clasp, making sure you thread through the part that detaches from the rest of the clasp when you unclip it. Now thread on your beads in the same pattern to match, forming the other side of the necklace.

Step 2

Thread the needle back through the crimp bead in the opposite direction and crimp to secure. Cut off any excess thread and cover using a crimp cover.

Step 3

Open a jump ring and use it to connect the upper clasp to the Phaistos Disk Pendant. Glue the crystal into the chaton setting and leave to dry.

Step 4

Add a jump ring to attach the pendant to the clasp. Now use another jump ring to attach the chaton in setting, and a last jump ring to attach your tiny bottle charm.

I filled the bottle with sand and tiny crystals, but you could add your own treasures!

Step 5

Now you can unclip the pendant and swap it when you want to update your look!