Cherry Blossom Bracelet | beadsdirect.co.uk
0

Cherry Blossom Bracelet

Products used in project:

Cherry Blossom Bracelet

Items (9)
Qty
Price
KO Beading Thread Purple 50m
TC311
1
Out of stock
Antique Silver Zamak Cord Ends with Loop 4x10mm 2mm Hole Pk4
F0141
1
Out of stock
Miyuki Delica Size 11 Beads Opaque Lavender 5g
DB660
1
Out of stock
Miyuki Delica Size 11 Beads Silver-Lined Dark Purple 5g
DB609
1
Out of stock
Miyuki Delica Size 11 Beads Silver-Lined Crystal 5g
DB41
1
Out of stock
Miyuki Delica Size 11 Beads Opaque White 5g
DB200
1
Out of stock
Total Cost
£9.98

Not all products are available for this project

Information about project:

Cherry Blossom Bracelet

Designed by: Katrina

Difficulty: Intermediate

Rating:

Make a pretty floral carrier bead bracelet using the peyote stitch!

Step 1

Download your project sheet to make your peyote carrier bead, following pattern number six.

Step 2

Cut two lengths of cord approx. 8inch long. Snip the end to a point so that it will easily go through the hole of the Carrier Duo bead. Thread it to the centre point of the cord. Thread on a large spacer bead from your findings kit. Repeat for the opposite side.

Step 3

Now take both pairs of cords and work out the length of your bracelet, remembering to allow a 1.5inches for your clasp. Trim the ends to size. Apply a small drop of glue to the ends of the cords and insert them into an end tip. Fold over the metal sides to hold the cord into place. Do this for the other side.

Step 4

Open a pair of jumprings and attach one to each of the cord ends. On one side attach the jumpring to a lobster clasp.