Learn how to make this Cherish Shell blue necklace with a mother of pearl disc pendant | Beads Direct

Cherish Shell Blue Necklace

Information about this project

Designed by: Leah Connolly


What you will need...

1x Blue Shell Square Cut Chips [BO517]
1x Beading Wire [W115]
1x White Mother of Pearl Disc Pendant [EX2982]
1x Silver Plated Triangle Jumpring [F1135]
1x Silver Plated Toggle Clasp [F127]
1x Silver Plated Crimp Bead [FCR1]

STEP 1: Decide how long you would like your necklace to be. Our necklace measures 41cm in length so you will need approx. 57 cm of wire.  Cut with pliers

Please note: If you would like to make your necklace longer you will need to add an extra pack of shell chip beads to your order.

STEP 2: Thread on a crimp bead (you can thread an additional crimp for extra security) then thread the wire through the loop on the toggle clasp and back through the crimps. Crimp in place.

STEP 3: Thread on the chip beads.

STEP 4: Once you are happy with the length of the necklace thread on a couple of crimp beads, thread the wire through the other toggle clasp and crimp into place.

STEP 5: Work out where the centre of your necklace is and attach a triangular jumpring. Finally attach your Mother of Pearl Pendant to the triangular necklace.