0

Candy Bubble Droplet Necklace

Information about this project

Difficulty: Intermediate

Rating:

Learn how to make this Candy Bubble Droplet Necklace using 6mm, 8mm and 10mm Rose Quartz Round Beads. 

Step 1

Cut around 15" of wire. Fold one end of the wire over about half an inch and secure the folded end with a rose gold callote.
Thread a jumpring onto the callote and close the hook to secure the jumpring. 

Step 2

Start to thread beads onto the wire, catching the loose bit of folded wire inside of the beads. 

Step 3

The threading sequence - 2 x rose gold 4mm beads, 1 x smaller pink pearl.

Repeat this 25 more times and finish the sequence with 2 more rose gold 4mm beads. 

Step 4

Finish the strand by folding the wire again close to the end bead.
Thread the folded bit of wire into the necklace to hide it under the beads.
Secure the folded end with a rose gold callote.
Thread a jumpring onto the callote and close the hook to secure the jumpring.
Thread a rose gold lobster clasp onto the jumpring and secure. 

Step 5

To create the gradient of pearls in the center of the necklace you will need ; 

19 x smallest pearl
9 x middle sized pearl
8 x largest sized pearl
20 x eye pins
11 x headpins

Take a look at this image to see which order to loop together your eyepins with pearls threaded onto them.
Remember to end each strand with a pearl on a headpin.