Thank you for viewing our archived gallery design. This design is in the gallery archive because we no longer stock some of the main items used to make this design and we don’t currently have suitable alternatives. However we didn’t want to remove the design completely as we thought it might inspire you. If you’d like to buy all the items needed to create a project please visit our main design gallery and browse our current designs.
Cut 30cm of each cord.
Knot the two cords together.
Leave approx. 3cm from the first. This is used to loop over the end button and secure on the wrist.
Leave approx. 5cm and tie another knot.
Thread on 1 BB17 and tie a knot.
Thread on the butterfly (F847) and tie a knot.
Thread on the other BB17 and tie a knot.
Thread on the end button (F838), one strand per hole.
Knot the button in place, approx. 5cm from the last knot.
Trim any excess thread.
Make sure you get the materials you need to create this design yourself! Click the button below to add everything you need to your basket in one go. You can edit the list too just in case you want to make more than one, or you already have some supplies at home.Get the items you need to make this