Instructions on how to make 'Brown Twilight' Bracelet made with real leather and memory wire |

Brown Twilight Bracelet

Products used in project:

Brown Twilight Bracelet

Items (2)
Fevi Kwik One Drop Instant Adhesive/Glue 1g Tube
Out of stock
Stainless Steel Memory Wire Bracelet Bright 12 Loops
Out of stock
Total Cost

Not all products are available for this project

Information about project:

Brown Twilight Bracelet

Difficulty: Beginner


Learn how to make this Twilight bracelet below

Step 1

Thread your memory wire through the hole in the braided leather. This can be fiddly at first. If the wire gets stuck, feel the leather to see how far through it has got. When you find where the wire is stuck, wiggle the leather a bit and it should continue feeding through.

Step 2

Cut off any excess memory wire using wire cutters. You may also wish to cut the braided leather depending on where you'd like the crystal ends to be positioned.

Step 3

Push the crystal end on to the end of the braided leather. It's quite a tight fit, but it will be easier to glue on if you've tried it before. Take the end off and add fevi kwik glue. Replace the end to secure to the leather. Repeat this for the other end.

Step 1