Designed by: Leah Connolly
Difficulty: No level set
Please note: You will need to learn how to do a Shamballa Knot (Square Knot) before attempting this piece. Click here for the link for the instructions
You will need:
1x 3.75" Snowflake Frame [W219]
1x 1.5mm Blue Shamballa Fashion Cord [TC401]
1x Silver Essential 10mm Shamballa Fashion Beads (3pk)[MBJ01]
1x Silver Essential 8mm Shamballa Fashion Beads (3pk)[MBJ02]
1x Blue Essential 8mm Shamballa Fashion Beads (3pk)[MBJ08]
3x Blue Shamballa Fashion Teardrop [MB404]
3x Turquoise Shamballa Fashion Teardrop [MB386]
1x Fevi Kwik Glue [W270]
Step 1. Place your round blue Shamballa fashion bead onto the arm of the snowflake frame.
Step 2. Cut 30cm of cord, start square knotting from the top of the arm working towards the centre of the snowflake. You will need to use the arm of the frame as the ‘centre knot’.
Step 3. After 6 square knots you will need to knot around the blue Shamballa bead you added previously.
Step 4. Add 1 full square knot after the bead and tie off the ends with a dab of glue.
Step 5. Apply glue to a half drilled teardrop and place it at the end of the arm.
You now have completed 1 full arm of the snowflake
Step 6. Repeat Steps 1-5 for the second arm but change the colour of the Shamballa Fashion Bead
Step 7. Repeat the steps above until you have finished all the arms of the Snowflake
Step 8. Finally, glue the half drilled beads onto the frame using fevi kwik. Tie on some of your leftover cord to the snowflake and hang off your tree.
Photo Instructions coming soon
If you like all the items to make up this snowflake you can click on the 'Add All Products To Basket' button below.
Please note: You will need to manually enter any multiples. You will need to add an additional 3x MB404 and 3xMB386 to your basket.
You should have a total of 12 items in your basket