Learn how to make this 'Black Ice' Bracelet Stack | beadsdirect.co.uk

'Black Ice' Bracelet Stack

Products used in project:

'Black Ice' Bracelet Stack

Items (3)
Beadalon 7 Strand Flexible Beading Wire 'Bright' 0.012in 30ft
Out of stock
X-Silver Plated Iron Jumprings 7mm 0.8mm Thick Pk100
Out of stock
Total Cost

Not all products are available for this project

Information about project:

'Black Ice' Bracelet Stack

Designed by: Sarah Millsop


Learn how to make this 'Black Ice' Bracelet Stack using Silver Charms.

Step 1

To create the three strand black Bracelet-
Cut three strands of the wire, approx 16cm long. Thread each wire through the three loops on one side of the box clasp.  Then thread the wires through a crimp bead, crush with pliers and trim the excess wire.

Step 2

Thread approx 30 onyx chips onto each strand of the wire.  Then thread the wires through the slider bead and thread on another 30 onyx chips.

Step 3

Loop the wires around the other side of the box clasp, through a crimp bead and trim.

Step 4

To create the white bracelet-
Cut a strand of elastic cord approx 20cm long. Thread crystal nuggets onto the cord, tie in a knot, and trim. You may wish to use glue to secure the knot.

Step 5

Repeat step 4 to create another crystal bracelet. Now attach both bracelets to the key charm using a jumpring.