Belle Gold Necklace

Information about this project


Scroll to the bottom to add all the products to make the Belle gold necklace to your basket in one click!

What you will need...

2x Gold Connector [CR189]
1x Gold Heart [CR183]
1x Gold Chain [CH1008]
1x Gold Jumpring [F1211]
1x Gold Triangle Jumpring [F1136]
1x Jet Chaton [AC999]
1x Smoked Topaz Chaton [AC1004]
1x Jet Heart [AC753]
1x Hypo Cement Glue [W139]

This golden Belle necklace is simple to make and easy to wear. The elegant design is delicate, rich and warm with a touch of exotic sparkle to catch your eye, or someone else’s! This dangly necklace with smoked topaz inset crystals and a jet wild heart would look great worn with black, cream or brown. Feel the love in the air as you Take a Make Break this weekend.

Step 1:  Cut a piece of chain approx. 37cm long and use jump rings to attach connectors to either end.

Step 2: Cut 2 pieces of chain, each 7 links long. Use a jump ring to attach to the free loop on the connectors already attached to your chain.  Follow with another connector after each chain.

Step 3: Now cut 2 pieces of chain, each 15 links long. Attach one each side below the connectors and then join together with a jump ring.

Step 4: Place a triangle jump ring on to the jet wild heart and close with pliers. Use another jump ring to attach the gold and jet wild heart to the ring that joins your chain together.

Step 5: Use Hypo Cement glue to set a Swarovski Elements Chaton in Smoked Topaz into one of the connectors closes to the heart. Repeat this process, adding a Swarovski Elements Chaton in Jet to the other connector nearest to the heart.

Step 6: Repeat step 5, swapping the chaton colours to the opposite side. Leave the glue to dry.