Learn how to make this Amazonite Layer Necklace | beadsdirect.co.uk

Amazonite Layer Necklace

Products used in project:

Amazonite Layer Necklace

Items (2)
Satin Cord 0.5mm Grey 5m
Out of stock
Beadalon Silver Plated Crimp Beads 2mm #1 Pk100
Out of stock
Total Cost

Not all products are available for this project

Information about project:

Amazonite Layer Necklace

Designed by: Holly Eve

Difficulty: Beginner


Learn how to make this Amazonite Layer Necklace using a stunning rhodium plated brass amazonite oval connector and stainless steel chain.

Step 1

Cut two lengths of thread measuring approx. 20" each. 

Step 2

Thread each onto each side of your connector charm to the threads halfway point. 

Step 3

Thread on a crimp bead onto each of the two doubled threads and crimp approx. 1cm away from the connector.

Step 4

At the ends of the threads, combine them and thread them through another crimp bead. 
Pass the left threads through the jumpring before the lobster clasp on your chain and back through the crimp. 
Squash the crimp.

Step 5

Repeat with the other side of the necklace threading on a crimp, threading through the jumpring before the extension chain, and back through the crimp bead.