X-Beadsmith EZ-Rivet Piercing and Setting Tool 1/16" Pk1
Pierce holes in metal and flat leather with this Beadsmith EZ-Rivet piercing and setting tool 1/16". Place your material under the piercing tip and then rotate the T-Bar clockwise until pierced through. Insert your rivet into the hole and turn the tool over and rivet with front side up, rotate T-bar to fasten.
- Comes with 1/16” T-bar screws that can be switched for a different size (W326) (3/32” kit sold separately)
- Use with metal sheet up to 18 gauge.
- Deep recess for extended 7/8” (22mm) reach.
- Instructions on how to use the tool are on the back of the packet.